Mothers Day Crafting - The Card

So, it was Mother's Day in the UK last Sunday - 10th March, and as usual I had to think up some new ideas of things to make my mother.

First came the card. I wanted to experiment with double embossing, based on an article that I'd seen in the latest issue of Craft Stamper magazine.

This was the first attempt. I inked the raised edge of the embossing folder with versamark ink before running it through the machine. I then sprinkled clear embossing powder on and melted it to create a resist surface.

I then took 3 co-ordinating Tim Holtz distress stains in peacock feathers, squeezed lemonade and shaded lilac, and dabbed some of the ink to a resist mat surface, being careful not to mix the inks together. I then swiped the card through the ink so it stuck to the parts that weren't covered with the clear powder.

I wasn't overly pleased with the result, so I decided I would cut out the good butterflies and use them as individual embellishments on the card.

I then had another idea to try the double embossing the other way round! This time, I swiped the distress stain straight from the bottle onto the card, in rainbow stripes.

Then I put it in the embossing folder and ran it through the machine. Then I took the versamark ink and gently swiped it over the raised parts and covered these with white embossing powder. After shaking off the excess, I touched up and parts that had been missed with a versamark pen. This left a piece of card which looked like this:

I trimmed off the edges and used this piece as a backing to the card. I embellished the rest of the card with matching flowers, buttons and the butterfly I had cut out and here is the perfect spring time mothers day card:

Read my other post to find out what I made my mum as her present....

Claire

New Year and Christmas Crafting

I know, I am probably the last person to write their New Year's blog post, but it's been quite a busy few weeks getting back into the swing of things.

Over Christmas I was very busy making presents for people.

The main present was a recipe book for my Mum, which I forgot to take pictures of so I can't post anything. I will need to try and take some next time I see her to show you. It featured 10 recipes from my childhood which me and my sister dug out of her recipe box and compiled into a fancy, decorated recipe book. She loved it.

I also made my mum a small cross stitch featuring a country cottage. It was a kit that she bought me to make, but I framed it in one of my Grandma's old embroidery hoops with some co-ordinating ribbon:

I also had to make a special Christmas card for my crafty friend and had seen an idea using Clarity stamps and shrink plastic.

My previous experience with shrink plastic wasn't great but it actually worked first time for this card. I die-cut the shrink plastic before I stamped it and then added a bit of colour. Instead of putting it in the oven, I heated it with my heat tool in a baking tray. This didn't work brilliantly and I think putting it in the oven would have been better.

For the background I had a brainwave as I couldn't find any backing paper that would match.

I stamped my snowflake stamp with versamark and embossed it with tinsel embossing powder. I then coloured the card with purple distress stain, leaving the embossed areas clear and visible.

I then layed purple ribbon across the card, segmenting it into 4. I layered up each bit of plastic onto gold card and stuck one in each segment. On the fourth segment I put a sentiment onto the gold card.

I have also listed all my jewellery on my Etsy shop. None of it has sold so far but lots of people have looked so fingers crossed someone will buy it soon!

That's all for now, time to get on with my projects for January. More posts soon.

The distressed look, heat embossing & acrylic paints

This was a technique that I tried out a few months ago and thought I would share it with you. It involves heat embossing and acrylic paint to achieve an unusual distressed look.

Here is the first card I made:

Here is what you need:

Coloured card, co-ordinating coloured acrylic paint, clear embossing powder, versamark ink pad, stamps of your choice, heat gun, large paint brush, a tissue

1) Choose the coloured card - this will be the colour that shows through your design.

2) Stamp your chosen image with the versamark ink onto the card and emboss with the clear powder.

3) Paint over the image and the surrounding card with the acrylic paint and allow to dry

4) Once the paint has dried, take the tissue and dampen it with water. Lightly rub over the embossed image to remove the paint, revealing the coloured card underneath. Then leave it to dry.

And now you have your image. Here is a close up of the flower on the card:

I applied some turquoise ink to the edges of the flower. On the background, I highlighted some of the features of the stamp, such as the watch and some of the wording, with some gold perfect pearls.

I then had a go at another card, which didn't turn out quite as expected but it can always be worked on:

The background was made using black card. I didn't have any white paint at the time (I have now purchased some so might have to try it again), so I used some picket fence distress stain. It didn't work quite as well as the paint probably would have done, because the black still shows through quite a bit.

The picture in the middle was made using red card and a bronze paint. Again, it didn't stand out as much as I would have liked because the colours were too similar, but it was an experiment and now I know what I need to change next time.

It can be a bit messy and time consuming as you have to wait for it to dry each time, but it can be very effective.

Experimenting with Inchies

Back in July I bought some of the Darkroom Door Garden Inchie stamps and up until last weekend I had only made bookmarks with them.

Inchies are exactly what they say they are - stamps which measure 1 inch square and can have any design in them. This particular set has 24 different stamps which feature butterflies, birds, plants and flowers.

The bookmarks I made are below and are really simple to make:

I took a piece of white card and a craft brush (an old fashioned shaving brush can be used for this as well). I took some co-ordinating distress inks and using the brush, swiped the colour over the card, starting with the lightest colour first.

Then I took the stamp I wanted and inked it up well with a black memento ink pad, making sure the stamp is well covered with the ink. Then stamp onto the coloured card and cut out the image. They were then mounted onto coloured, then black, then coloured card, with a piece of ribbon added under the black card.

There are so many co-ordinating designs in this set that the combinations are endless.

Then, last weekend I realised I hadn't done much with these stamps so had some inspiration to make some cards with them. The first one I made is below, which builds on the bookmark idea:

First of all, I took a piece of white card and swiped over pine needles, broken china and dusty concord distress stains, starting with the broken china as the base. I then spritzed the card with water and dried it. Then, on one half of the card I swiped over picket fence distress stain to lighten the colour. Then I spritzed with water again and dried it with the heat tool.

I chose 9 stamps that went well together and stamped them as above with the memento ink onto the side that hadn't been lightened. I then cut them out and arranged them onto a piece of purple card. I then mounted this onto a piece of black card.

Before sticking to the coloured card I used gold perfect pearls and painted a thin border round the edge of the card. This could also be done with a gold gel pen, but I didn't have one so used the next best thing!

I cut a piece of black card to cover a 6x6 card blank and stuck the whole piece onto it. I stamped the sentiment onto some spare coloured card and mounted it onto black and again edged it with the gold.

Perfect pearls are one of my favourite mediums to use in crafting but I normally use them wet as a paint, so I thought I would experiment with using them dry on the next card:

Again, I cut a piece of black card to fit a 6x6 card blank. I took some bubble wrap, cut it to size and stuck it onto an acrylic block with pritt stick. I then covered the bubble wrap with versamark embossing ink and stamped it onto the black card.

I then brushed over the perfect pearl powder so it stuck to the ink. I did this randomly to create the rainbow effect. I removed any excess powder by rubbing the image with a tissue and sprayed it with hairspray.

Yes you heard right - hairspray acts as a very thin glue covering which stops the powder being rubbed off. Just spray it lightly over the image and leave to dry.

I then took this one step further and swiped the versamark to cover a piece of black card. I then brushed the pearl powder over the stamped area. I did this diagonally, again to create a rainbow.

Using Stayzon ink this time, I stamped 3 of the inchie images over the dusted card. Before cutting out, I sprayed with the hairspray again. This technique is quiet effective because the pearl sheen of the powders shows through the black ink so the whole image shines.

I painted round the edge of the images with the gold perfect pearls, mounted them onto a black card strip and painted round this as well.

For the sentiment, I stamped it onto the brushed card and die cut the shape round it and painted the edge again. This card took a bit longer to make as it was more fiddly but it is worth the extra effort because the effect looks brilliant after it's finished.

I decided I was a bit bored of black by now so the next card is much more colourful and again, fairly simple to make:

I chose 4 co-ordinating distress inks: broken china, tattered rose, victorian velvet and milled lavender. I then chose 8 different inchie stamps and stamped them round in a pattern on a white piece of card, varying the colours. I then cut them out and arranged them round a 6x6 card blank. I made sure that no same design or colour was next to each other.

The butterfly and the sentiment in the middle were stamped using blue pearlescent ink.

I am quite pleased with the three cards and now plan to use the inchie stamps to create some co-ordinating notebooks. The stamps are very versatile and can be used for a large variety of crafting projects.

Heat embossing and Fran-tage

I recently came across the Fran-tage embossing enamels from Stampendous, and being the avid heat embosser that I am, I had to try them out.

These powders are made up of different fragments or various different sizes, which melt into different shapes when heated. There is also glitter in each pot and the enamels come in a range of colours.

The card below was made using a large chipboard flower which is inked with versamark ink and sprinkled on the powder. (sorry the picture hasn't come out too well). The powder used was shabby pink.

You can just about make out the gold flecks in the flower which creates a slightly aged look, and a finish that would not be achieved with normal embossing powders.

Below is another card that I made in the same way.

Because the chipboard was covered with the versamark ink before sprinkling on the powder, you get a thin coverage over the flower and the gold flecks aren't as prominent. For the centre of this flower I used the shabby white powder and didn't use any versamark ink.

After cutting out the circle, I sprinkled the circle with the powder and laid over some shaved ice flakes. Using tweezers to hold it and being careful not to burn myself, I heated the circle from behind. You need to do this from behind otherwise the powder and flakes just fly off. Once the powder starts melting you can then move to the front if you wish. The flakes use the molten powder to adhere to the card. This gave a contrasting, shiny centre to the flower.

After attending a heat embossing workshop, I learnt about the sprinkling technique and had an idea about using the white powder as snow. The below card illustrates my idea!

For this card I first of all stamped and embossed the snowman in ordinary white powder. I then used my mica powders to add a bit of shimmery colour to him.

Then I swiped my versamark ink pad along the bottom of the card and sprinkled a generous layer of the shabby white frantage powder so it stuck to the powder. I added some of the shaved ice flakes on top of the powder and heated from behind. Because of the amount of powder added, this really goes molten when heated and the flakes adhere nicely.

I then took a pinch of the embossing enamel and scattered it randomly over the top of the picture to create falling snow.

I love the shaved ice flakes with the powders and decided to make a sparkly girly card for a friends birthday:

For this card, I first of all I used my spun sugar distress stain to colour the card and then sponged some tattered rose distress ink around the edges. Then I randomly added pools of the shabby pink embossing powder with shaved ice flakes in each pool to give a nice sparkly background.

The large butterfly was made with fusible fibre and the petals were embossed onto vellum. The two blue butterflies were embossed onto acetate and adhered with clear glue dots.

I am planning on getting more of the frantage powders. I had a play with the aged black powder in the workshop, combining it with some gold mica flakes and this looked very effective. So watch this space for more projects using frantage!